Step 1, Remove Door Handles - GE ZISS480NXBSS Installation Instructions Manual

ZKHSS2 Tubular Stainless Steel Handles
This kit provides for the installation of Tubular Stainless Steel
handles an 3/4" averlag custom panels.
TOOLS AND MATERIALS REQUIRED
In addition to the custom door panels, gou need:
• #2 PNflipsscrewdriver
• Ceeter punch
• Drill and7/32" bit • Hammer
and7/8" spadebit
• Safetyglasses • Pencil
PARTS LIST
8 Handlestaedoffs 3/32" Allen wrench for set screws
10 Screwsfor handbstandoffs 10 Plasticspacers(8 required,2 extral
#10-32x1"panheadmachhre
screws(8 required,2 extra)
88888
10Set screws(8 required,2 extra)
[STEP 1] REMOVE DOOR HANDLES
• Open the refrigerator door to 90 °. Remove
the 6 screws holding the handle to the door.
• Remove the 6 screws holding the handle side trim.
Retain all screws and trim. Discard the handle.
• Follow the same procedure to remove the freezer
handle and trim.
[
II L I1 _
20