L/A" Framed Panel Dimensions - GE ZISS480NXBSS Installation Instructions Manual

Design Guide
114" FRAMED PANEL DIMENSIONS
If gou choose to install framed panels, theg must
be cut to the dimensions shown. The panels will slide
into the frame on the door and grille.
Non-Dispenser Models
If the custom panel is less than 1/4" thick and it fits
Iooselg in the door frame it can be backed up with
a piece of filler material or foam tape to improve
the fit.
Door
\
x
_t
_ Trim
Reveal
.. 1/4"
Panel
IMPORTANT NOTE:Maximumtotal panelweight:
• Freshfood door panel- 75 ibm
• Freezer d oor panel- 53 Ibm
• Grille Panel- 18 Ibs.
IMPORTANT NOTE - DISPENSERMODELS
The refrigerator is supplied with two dispenser trims,
one for framed panels and one for overla 9 panels.
• If the panel is less than 0.250" thick, a noticeable gap
mag be created around the dispenser trim. Foam
tape ma9 be applied on the door to improve the fit.
• If the panel is more than 0.250" thick, the dispenser
trim cannot be secured to the doon
See Dispenser Trim Fit Example, page 9.
Grille Panel
q
Dispenser F
Cutout J
DispenserCutout
I_- 9-5/8" _1
Theframedpanelmust be 1/4" nominalthicknessto fit
the dispensertrim.
Freezer FreshFood
Panel Panel
8ide-bg-Side(in inches)
36" Hodels
42" Models
48" Hodeis
33-7/8 9 68-3/8 14-9/1618-9/16
39-7/8 9-1/2 68-3/8 14-9/1624-9/16
95-7/8
9-1/2 68-3/8 18-9/1626-9/16
7