90 ° Door Swing - GE ZISS480NXBSS Installation Instructions Manual

Design Guide
Refrigerator
............
Top View
90 ° DOOR SWING
(optional setting)
Scale 1:1
IMPORTANT NOTE -
FOR DISPENSER MODELS:
Dispenser models are supplied
with two dispenser trims, one to fit
framed panels and one for overlag
panels. Dispenser trim fit to the
custom panel depends on correct
panel thickness. Framed panels
must be 1/4" nominal. Overlag
panels should be constructed as
shown to accomplish a total 1.100"
thickness. See pages 7 and 8 for
details.
Doer
Case Trim
23-7/8"
FromRearof
Refric_rator
Frameless Cabinets:
The case trim overlaps
cabinets at the top
and sides. Therefore,
frameless cabinets mag
require filler strips to
prevent interference
with cabinet door swing.
The opening must allow
far filler strips.
1/4"
• 1/2"
5