Step 3, Install Assembled Handles; Step 4, Install Dispenser Trim - GE ZISS480NXBSS Installation Instructions Manual

ZKHSS2 Tubular Stainless Steel Handles
[STEP 3] INSTALL ASSEMBLED HANDLES
• Slide the assembled panels into the door trim.
• Secure both trims using all the original screws.
Dispenser Models Onlg:
• The dispenser controls protrude begond the face of
the freezer door. To avoid damage to the dispenser,
the trim at the top of the door should be removed.
• Remove the screws holding the top trim in place.
Lift off the trim.
• Place the freezer panel into the bottom channel
and slide into the hinge side trim.
• Reinstall the top trim piece with screws.
iii@ii
Reinstall all original s crews
[STEP 4] INSTALL DISPENSER TRIM
For Dispenser Models Onlg:
There are two dispenser trims shipped with your
dispenser refrigerator. Note that the inside depth
of the frames are different. Choose the trim marked
3/4" overlay panels.
• Press and snap the dispenser trim into the dispenser
recess on the door.
22