Step 1, Remove Door Handles - GE ZISS480DXBSS Installation Instructions Manual

ZKHSS2 Tubular Stainless Steel Handles
This kit provides for the installation of Tubular Stainless Steel
handles on 3/4" overlay custom panels.
TOOLS AND MATERIALS REQUIRED
In addition to the custom door panels, you need:
• #2 Phillipsscrewdriver • Centerpunch
• Drill and 7/32 "bit
c_nd7/8" .s-pc_de bit
• Safetyglasses
Hammer
• Pencil
PARTS LIST
s
8 N_ndle ste_ndofFs
70 Screws for hc_ndle
32x 7"pcln hee_d rnc_chine
screws (B required, 2 extn_)
3/32" Allen wrench for set screws
70 PIc_stic .spc_cers ste_ndoffls /170-
(8 required, 2 extra)
70 Set screw.s (8 required, 2 extrc_)
[STEP 1[ REMOVE DOOR HANDLES
, Open the refrigerator door to 90 °. Remove
the 6 screws holding the handle to the door.
Remove the 6 screws holding the handle side trim.
Retain all screws and trim. Discard the handle.
, Follow the same procedure to remove the freezer
handle and trim,
2O