Placing A Thick Original On The Platen; Zoom Copies; Standard Zoom - Kyocera FS-1016MFP Operation Manual

Copy Functions

Zoom Copies

4-4

Placing a Thick Original on the Platen

When copying from an original which
cannot be placed in the document
processor (books, magazines, etc.), open
the document processor and place the
original directly on the platen.
Close the document processor after use.
It is possible to change the zoom ratio in order to make copies of an enlarged or
reduced size. The following modes are available for selecting the desired zoom ratio.
Mode

Standard Zoom

Variable Zoom
Standard Zoom
1
Press [Zoom].
2
Press or to select the desired zoom ratio.
3
Press [OK]. The message display returns to the ready screen. The new zoom ratio
is registered.
To start copying, place the original on the platen and press [Start].
Description
Copies can be made at one of the fixed zoom ratios.
The following ratios are registered in the machine:
Original 100%
Fit To Paper
A4 - Letter 94%
Letter - A4 97%
Legal - Letter 78%
Legal - A4 83%
The zoom ratio can be set to any 1% increment
between 25% and 400%, as desired and shown below.
Custom
25%
400%
OPERATION GUIDE