Kyocera FS-1016MFP Operation Manual page 86

Specifications
1
2
3
4
5
1
2
3
4
5
6
7
8
9
11-4
Using Print Server (IB-110)
When the Print Server (IB-110) is connected, perform the following procedure.
Connect and set up the machine, refer to the Print Server's Set up Guide.
Loading Software
Follow steps 1 to 8 of Loading Software on page 3-2.
Select Custom Mode and click Next.
Select Network Port and click Next.
Click Select All and click Next. The installation program installs the software.
When the installation is complete, the Installation Completed Successfully
window is displayed. Click Finish to proceed to Setting Print Port on page 11-4.
Setting Print Port
The Kyocera Printer Installation Wizard window is displayed. Click Next.
Select Kyocera FS-1016MFP and click Next.
Select Create a new port and select KMprint Port from the drop down list.
Click Next. The KMprint Add Port Wizard window is displayed.
Enter the IP address and click Next.
Enter the Destination Printer Port Name "USB#### (# is an arbitrary character)" and
click Next.
Perform the procedures displayed on the installation wizard.
When the installation is complete, the Printer Installed Successfully window is
displayed. Click Finish to leave the install program and return to the disc main menu.
Open the Printer's Properties and confirm Enable bidirectional support of the Ports
tab is checked.
OPERATION GUIDE