Placing Originals In The Document Processor - Kyocera FS-1016MFP Operation Manual

Copy Functions
5
6
7
4-2
Enter the number of copies required. Up to
99 can be entered.
Open the original cover and place the
original face down onto the platen against
the left rear corner of the platen. Close the
original cover.
Press [Start]. Copying begins immediately.
To cancel copying, press [Stop/Clear].
Completed copies are delivered to the
output tray.

Placing Originals in the Document Processor

The document processor automatically feeds and scans multiple sheet originals one
by one.
IMPORTANT: Be sure that the document processor is closed whenever transporting
the machine.
Acceptable Originals
• Use sheet originals only
• Paper weight: 60 to 105g/m²
• Paper sizes: Legal (Maximum), Statement and A5R (Minimum)
• Maximum number which can be set at one time: 50 sheets (50 to 80g/m²)
/
/
OPERATION GUIDE