Placing A Thick Original On The Platen; Zoom Copies; Standard Zoom - Kyocera FS-1116MFP Operation Manual

Copy Functions

Zoom Copies

4-4

Placing a Thick Original on the Platen

When copying from an original which
cannot be placed in the document
processor (books, magazines, etc.), open
the document processor and place the
original directly on the platen.
Close the document processor after use.
It is possible to change the zoom ratio in
order to make copies of an enlarged or
reduced size. The following modes are
available for selecting the desired zoom
ratio.
Mode

Standard Zoom

Variable Zoom
NOTE:
Fit To Paper is used when original that there are characters and
illustrations in a full form is copied. The blank part of the print is calculated, and
original is reduced and copied. It is not a function to enlarge or reduce by the
automatic operation according to the paper size.
Standard Zoom
1
Press [Zoom].
2
Press or to select the desired zoom ratio.
3
Press [OK]. The message display returns to the ready screen. The new zoom ratio
is registered.
25%
Description
Copies can be made at one of the fixed zoom ratios.
The following ratios are registered in the machine:
Original 100%
Fit To Paper
Letter - Statement 64%
A4 - A5 70%
Statement - Letter 129%
A5 - A4 141%
The zoom ratio can be set to any 1% increment
between 25% and 400%, as desired and shown below.
Custom
400%
OPERATION GUIDE