Switching Power On - Mita DP-2800 Instruction Handbook Manual

Operating Procedures

Switching Power On

2-12
Check that the power cord is securely plugged in at both ends. Check that the printer is connected to
the computer (See page 1-25).
1. Push the power switch to the ON ( | ) position.
Power Switch
2. Wait for the printer to warm up. During warm-up the message display indicates Self test.
3. At the end of the warm-up period, the ON LINE indicator lights, and the message display
indicates Ready.
The printer is now ready to print.
Note _____________________________________________________________________
If an error is detected while the printer is warming up, the ATTENTION indicator will light. A
message concerning the error will be displayed in the message display. (See Chapter 4.)
CAUTION
If the printer will not be used for a short period of time (overright, etc.), turn the power switch
OFF(O). If it will not be used for an extended period of time (vacations, etc.), remove the
power plug from the outlet for safety purposes during the time the printer is not in use. Also
be sure to cover the printer so that dust does not accumulate.