Cleaning - Mita DP-2800 Instruction Handbook Manual

Cleaning

Cleaning
4-10
Be sure to clean the main charger unit and paper feed unit along with replacing the toner kit. Also be
sure to clean the inside of the printer periodically (about once per month) to ensure optimum print
quality even if you are not replacing the toner kit.
Note______________________________________________________________________
If the toner container has been replaced when the message Replace Toner Clean printer was
displayed, the message Clean printer Press CONTINUE will be displayed after replacement.
After cleaning the inside of the printer following the procedure shown below, press the CONTINUE
key; the message will disappear and the printer will be ready for printing.
WARNING
For safety purposes, ALWAYS remove the power plug from the oulet when cleaning the
main charger.
CAUTION
For safety purposes, ALWAYS remove the power plug from the outlet when performing
cleaning operations.