Mita DP-2800 Instruction Handbook Manual page 159

Indicators and Messages
5-10
Message
Load paper
(paper size)
Cassette
not loaded
Paper jam
Open front cover
Paper jam
##############
Warning
Low memory
Toner low TONER DP-
2800
Replace Toner
Clean printer
Corrective Action
The paper size does not match.
The size of the paper in the cassette is different to the size specified by the
application software or by PRESCRIBE II command. Put paper of the specified
size into the cassette.
If the CONTINUE key is pressed, printing will be resumed. However, if more
than one sheet is to be printed, the same message will again be displayed
from the second sheet onward.
You can abandon printing by pressing the CANCEL key.
The cassette is not closed securely,
Close it tightly.
Paper has become jammed.
Open the front cover. The location of the paper jam is displayed in the
message display.
This message appears when the front cover is open during a paper jam.
Letters A through I and numbers 1 through 6 will appear in place of the #'s.
For details on the meaning of the text displayed, see page 5-16. A label
displaying these number indications is also attached to the back of the front
panel.
The indicator on the front panel also flashes the location of the paper jam.
The printer's internal memory is running low.
Remove any unnecessary download fonts and/or macros. You can check the
amount of user memory currently available by printing a status page.
There is not enough toner inside the toner container.
There is not enough toner. Prepare a new toner container. (See Chapter 4.)
There is no more toner in the toner container.
The printer has stopped because there is no more toner. Replace with a new
toner kit. After replacing, be sure to clean the printer. (See Chapter 4.)
(Continued on next page)