Mita DP-2800 Instruction Handbook Manual page 107

Memory Cards
2-38
5.
Check that the message display has changed to Waiting and press the FORM FEED key.
The printer will automatically print the data just written (example below). This printout can be used to
check the name (partition name) under which data was written and confirm that it was written properly.
Slot number: Slot name for the memory card (only A is supported)
Data type: Data type (only 2 is supported)
Partition name: Name of the partition (data) written
Write data length: Size of the partition data written (in units of bytes)
After printing is finished, the message display will return to Ready.