Mita DP-2800 Instruction Handbook Manual page 94

Menu
Set the number of copies to be printed. This can be set up
Number of copies
to 999.
Switches the printer emulation.
Emulation >
The mode can be further set if KC-GL emulation is set.
> Selects the print font.
Font
Size reduction settings [See page 23]
Page set
Print direction settings [See page 23]
Page orientation
The following settings can be made from sub-menus
HARD DISK >
when an optional hard disk unit is installed.
(For details, please read the hard disk unit instruction
manual.)
The following operations can be performed from sub-
MEMORY CARD >
menus on memory cards installed in the printer.
The multi-purpose tray mode can be set to priority,
>
MP tray mode
cassette or manual.
Pressing the
allowing you to set the paper size for the multi-purpose
tray.
This is displayed when an optional postcard feeder (EF-
Univ. paper size
100) or universal feeder (UF-100) is installed. The paper
size can be set for either of these feeders.
This can be changed depending on the thickness of the
Paper Type
paper to be printed on.
To prevent paper jams, be sure to feed thick paper from
the multi-purpose tray and output on the face-up tray. For
details on paper which can be used, see Appendix B.
Description
4
key will display > MP tray size,
2
Thin: 60 to 70 g/m
2
Normal: 70 to 80 g/m
2
Thick: 90 to 200 g/m
Chapter 2 Operating the Page Printer
Default Setting
001
HP LaserJet 5Si
bitmap
[CS] ® [CS]
Portrait
—
—
First
A4 or Letter
DL
Normal
(Continued on next page)
2-25