Adjusting The Print Density; Setting The Audio Warning (Buzzer) - Mita DP-2800 Instruction Handbook Manual

Adjusting the Print Density

Setting the Audio Warning (Buzzer)

If necessary, the print density can be adjusted from the MODE SELECT MENU. The required print
density can be selected from five different steps (01 – 05). The factory setting is 03 , and there is
normally no need to alter this setting.
When using the KIR function, please use the " 03 " setting. For details on adjusting the KIR mode, see
page 2-45.
In addition to the message displayed when the paper supply is exhausted, or when paper jamming
occurs, an audio warning is made to sound. This is useful, for example, when the printer is in a
location some distance from the user.
The audio alarm is set to off when leaving the factory.
If the alarm is turned on, the buzzer will sound according to the type of printer error as given in the
following table.
Resource Protection
2-49