Mita DP-2800 Instruction Handbook Manual page 167

Correcting a Paper Jam
5-18
Correcting Paper Jams
CAUTION
Pull out the paper feed unit and wait a while to allow the fuser unit to cool. Do not touch
the fuser unit as this may result in a burn injury.
WARNING
Take care not to leave any small pieces of paper in the printer when removing
paper jams as this may result in fire.
Note that data remaining in the printer will be lost if power is turned off while correcting a paper jam.
After checking the location of the paper jam using the table on the previous page, take corrective action
according to the table on the next page. After removing all jammed paper, the printer will automaticaly
resume printing.
Fuser unit