Mita DP-2800 Instruction Handbook Manual page 64

Precautions on the Handling of Extended SIMMs
The description given below is intended for service personnel.
Static electricity which may accumulate in the human body through walking on carpets or other such
surfaces is the enemy of SIMMs loaded with many semiconductor chips. Pay attention to the following
things before installation to protect memory chips against damage from static electricity.
·
Do not remove the SIMMs from their anti-static bag until immediately prior to installation.
·
Eliminate any static electricity from your body through grounding before touching the SIMMs.
·
Be absolutely sure when handling the SIMMs to hold them by the substrate without touching the
printed connector section.
Chapter 1 Safetyguards and Installing the Page Printer
1- 43