Network Environment; Print Feature; Scan Feature - Xerox WorkCentre 5019 Network Addendum

Network environment

This section describes the environment settings needed to use the machine as a network printer.
Note To connect the machine directly to a computer to use as a local printer, refer to the
WorkCentre 5019/5021 User Guide.

Print feature

The machine can be connected to a network for use as a network printer.
Print from network-connected computers using the TCP/IP protocol.
To use the machine as a network printer, you need to activate the port to use for printing.
• LPD: Activate this setting when using the LPD port.
• Port9100: Activate this setting when using the Port9100 port.
Note This feature is available when the optional Network Print Kit is installed.
For information on how to set TCP/IP, refer to
For information on how to activate a communication port, refer to
port on page 13.

Scan feature

The machine supports the scan feature using the USB interface connection.
Important
Scanning through an Ethernet network is not supported.
For more information, refer to the WorkCentre 5019/5021 User Guide.
6
Network Connection
LPD / Port9100
Setting the network environment on page 8.
Activating the communication
® ®
Xerox WorkCentre 5019/5021
Network Addendum