Setting The Machine's Ip Address (Ipv6) - Xerox WorkCentre 5019 Network Addendum

Workcentre
Hide thumbs Also See for WorkCentre 5019:
Table of Contents

Advertisement

If the machine's IP address has not been set, you will need to set the IP address on the control panel or
using the Printer Setup Utility on the CD-ROM. Refer to
Address
on page 10.
Notes
If the network has a DHCP server, the machine's IP address may change, so check the
address periodically.
The machine can acquire address information automatically by using a BOOTP or RARP
server.
For information on how to set the IP address from the control panel, refer to
page 33.
After setting the program numbers from 1008 to 1020, print out the System Settings Report,
and check the applied settings.
For information on how to print the System Settings Report, refer to the WorkCentre 5019/5021
User Guide.

Setting the machine's IP address (IPv6)

The machine supports IPv6 addresses in an IPv6 network environment.
The machine's IP address type is set to IPv4 by factory default. To use the machine in an IPv6 network
environment, set the IP address type to IPv6 or both types. The IPv6 address is set automatically when
the machine is restarted.
Print the System Settings Report to check the IPv6 address.
You can set a fixed IPv6 address for the machine using either of the following methods:
Use the Printer Setup Utility on the CD-ROM. Refer to
IP Address
on page 10.
Use the control panel to make the setting manually.
Use CentreWare Internet Services to make the setting manually. Print the System Settings Report
to check the address set automatically, then use that address to access CentreWare Internet
Services.
From the Properties tab, select Connectivity > Protocols > TCP/IP > IP Mode. Set the IP Mode to
IPv6 or Dual Stack. The IPv6 address can be entered manually if the Enable Manual Address
checkbox is selected under IPv6.
For information on how to print the System Settings Report, refer to the WorkCentre 5019/5021
User Guide.
For information on how to make settings from CentreWare Internet Services, refer to
on CentreWare Internet Services
®
®
Xerox
WorkCentre
5019/5021
Network Addendum
Using the Printer Setup Utility for Setting the IP
Using the Printer Setup Utility for Setting the
on page 17.
Network settings
on
Setting items
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5021

Table of Contents