Table of Contents
Advertisement
6.3 Basic Setting
1. Connect the USB cable to TR-101 and the PC's USB port after installing
the driver.
2. Turn on the power of TR-101:
(i) Please wait for a while until the startup process is finished.
(ii) Press and hold the "Answer/Hang up" button about 5 seconds until you
see the three LEDs flashing slowly and simultaneously. Release the button
and it will enter the setup mode.
3. Start the TR-101 Setup Wizard program in your PC (or double click on the
"TR101-Setup Wizard" icon from desktop).
4. Click on the Scan button to scan the COM port for which TR-101 is connected.
When the scan process is finished, click on OK and it will automatically set the
correct COM Port.
5. Click on the Setup Wizard button to open the setup dialog box.
6. The Setup Wizard will guide your through to complete the settings.
:
Note
If your SIM card has the PIN code protected, a
dialog box will pop up first to ask you to enter the PIN.
(Be careful when you enter the PIN code. Normally, if you
enter the wrong code for 3 times, the SIM card will be
locked. If you do not know the PIN code or it has been
locked, please consult with your SIM card provider.
11
TR-101
Advertisement
Table of Contents
