MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing rear wheel
x
9.30
–
Operate the hand brake lever several times until the brake pads are lying correctly on
the brake disc.
Info
This will cause the brake caliper to align with the brake disc.
–
Fully tighten screws
Guideline
Screw, front brake caliper
–
Take the front from the work stand. (
–
Pull the front wheel brake and push down hard on the fork several times to align the
fork legs.
–
Fully tighten screws
Guideline
Screw, fork stub
–
Taking rear from work stand. (
600826-10
–
Jack up the rear of the motorcycle. (
.
M10x1.25
p. 56)
.
M8
p. 57)
p. 57)
45 Nm
Loctite
®
243™
(33.2 lbf ft)
15 Nm
(11.1 lbf ft)
80