MAINTENANCE WORK ON CHASSIS AND ENGINE
Mounting the seat
9.36
Reinstalling the fuel tank
9.37
–
Suspend the seat on the screw
it forwards. The two projections
–
Push the locking pin
the locking pin locks in place with an audible click.
–
Remove the ignition key from the seat lock.
–
Finally, check that the seat is correctly mounted.
700199-01
–
Remove the seat. (
–
Remove screw
Info
The fuel lines do not need to be disconnected.
700159-01
, press the rear downwards and at the same time push
must be inserted into the frame.
into the lock housing and push the back of the seat down until
p. 86)
.
87