Draining The Coolant - KTM 690 DUKE EU 2009 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Draining the coolant

x
9.58
Warning
Scalding hazard During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other components of the cooling system when the engine is hot. Allow the engine
and radiator to cool down. If you are scalded, hold the affected part under cold water immediately.
–
Screw off the radiator cap
The radiator must be completely filled.
» If the coolant level does not meet specifications:
–
Rectify the coolant level and find out the cause of the loss.
Alternative 1
Alternative 2
700182-11
» If you had to add more coolant than the specified amount:
> 0.50 l (> 0.53 qt.)
–
Fill/bleed the cooling system.
–
Mount the radiator cap.
–
Position the fuel tank. (
–
Mount the seat. (
and check the coolant level in the radiator.

Coolant ( p. 162)
Coolant (mixed ready to use) (
x (
p. 88)
p. 87)
p. 162)
p. 120)
119