Using Brother Twain Scanner Driver With Your Apple ® Macintosh - Brother Backup Battery Owner's Manual

Using Brother TWAIN Scanner Driver with
Your Apple
The Brother MFC software includes a TWAIN Scanner driver for Macintosh
TWAIN Scanner driver can be used with application that supports the TWAIN specification. You
can use PaperPort for scanning.
Accessing the Scanner
®
Run your PaperPort
your screen. The first time you use the Brother TWAIN driver, set it as the default by choosing the
"Select Source", then click the PaperPort icon. Afterward, for each document you scan choose
"Acquire Image" by clicking the PaperPort icon. The Scanner setup dialog box will appear.
Scanning a Document into Your Macintosh G3, G4 or iMac
1
Insert the document face up in the ADF, or face down on the glass platen, again.
2
Adjust the following settings, if needed, in the scanner setup dialog box:
Resolution
Color Type
Brightness
Contrast
Scanning Area
3
Click Start.
When scanning is finished, the image will appear in your graphics application.
104
Chapter 17
®
Macintosh
software. You will see the PaperPort
®
®
icon in the upper right hand corner of
® ®
. This Macintosh