Brother Backup Battery Owner's Manual page 121

ERROR MESSAGE
MACHINE ERROR XX Machine has a mechanical problem. Turn off the power.
NO RESPONSE/BUSY The number you called does not
NOT ASSIGNED
OUT OF MEMORY
(When the machine is
used as a printer.)
OUT OF MEMORY
(When the machine is
used as a copier.)
PAPER JAM
PLS OPEN COVER
TONER EMPTY
CAUSE
answer or is busy. Or, you may have
reached number that is not connected
to a fax machine.
You tried to access a Speed Dial
number that is not programmed.
The machine memory capacity has
been exceeded.
The machine memory capacity has
been exceeded.
The recording paper is jammed in the
machine.
A page, piece of paper or paper clip,
etc. may be jammed inside the
machine.
Toner is used up and printing is not
possible, or toner cartridge is not
installed into the drum unit.
ACTION
Then contact your Brother dealer
for service.
Check the number and try again.
Set up the Speed Dial number.
(See Storing Speed Dial Numbers,
page 13.)
- If you have installed the
®
Windows driver, try again
after setting the True Type
mode to "Print as Graphics" in
the PRINT menu of your
application software.
- Reduce the print resolution or
reduce the complexity of your
document.
See Out of Memory Message, page
45.
See Printer Jam or Paper Jam,
page 112.
Open the top cover and remove the
drum unit. If you see any jammed
paper or other item, gently pull it
out. Reinstall the drum unit, then
close the top cover. If the error
message remains, open and close
the top cover again. If the machine
cannot reset itself and return to the
date and time prompt, it will
display MACHINE ERROR XX.
Then contact your Brother dealer
for service.
Replace the toner cartridge with a
new one, or install the toner
cartridge into the drum unit. (See
Replacing the Toner Cartridge,
page 123.)
Troubleshooting and Maintenance
111