Sending Operation - Brother Backup Battery Owner's Manual

Manual and Automatic Fax Redial
If you're sending a fax manually (with external telephone) and the line is busy, press Redial/Pause
and Fax Start to try again. Anytime you want to make a second call to the last number dialled, press
Redial/Pause and Fax Start to save time.
If you're sending a fax automatically and the line is busy, the machine will automatically redial up
to 2 times at 2 minute intervals for Australia or up to 2 times at 3 minute intervals for New Zealand
(10 times at 3 minute intervals for some countries).
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
When you press Redial/Pause, a dash "-" will appear on the display. By storing a
pause, you can create a delay of 3.5 seconds.

Sending Operation

Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the external telephone's handset.
1
Insert the document face up in the ADF, or face down on the glass platen.
2
Dial the number by using Speed Dial, Search or dial pad.
3
Press Fax Start.
Manual Transmission (With an External Telephone)
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending a fax.
1
Insert the document face up in the ADF, or face down on the glass platen.
2
Pick up the handset of the external telephone and listen for a dial tone.
3
Dial the number by using Speed Dial, Search or dial pad. (See Dialling a Number, page 16.)
4
When you hear the fax tone, press Fax Start.
5
To hang up, replace the handset of the external phone.
Manual transmission does not use memory.
17
Sending a Fax