When The Copier Is Not Operating Correctly - Konica Minolta 7115 Manual

9
9.2

When the Copier is not Operating Correctly

Symptom
Nothing is indicated on the
control panel.
The [START] key does not
light green.
No copies are produced
even when the [START] key
is pressed.
Keys on the control panel do
not respond.
The copier cannot be turned
ON.
9-4
Possible Cause
Only the [START] key lights
green.
The Auto Shut OFF function
has been activated.
An account number has not
been entered.
An icon on the control panel
is lit.
The copier is still warming
up.
The Interrupt indicator is lit.
The power cord is unplugged
from the power outlet.
The room's circuit breaker is
tripped.
Troubleshooting Tips
Action
The copier is in the Power
Save mode. Press any key
on the control panel to leave
the mode. (p.3-18)
Turn OFF, then ON, the
Power Switch. (p.3-15)
Enter the account number
according to the procedure
given in "To enter an account
number". (p.3-20)
Take necessary action to
correct the problem indicated
by the lit icon. (p.3-14, p.8-1)
The copier takes about 30
seconds to complete
warming up after it has been
turned ON.
The copier is in an interrupt
mode. Press the
[INTERRUPT] key to leave
the interrupt mode. (p.3-19)
Plug the power cord into the
power outlet.
Close the room's circuit
breaker.
Konica 7115/7118