Channel Plan Configuration - Wavetek MS1300 Operation Manual

Channel Plan Configuration

SELECT CHANNEL PLAN
Channel plans are stored automatically when they are created. Use
this option to select from a list of available plans.
A small arrow appears in the list to the left of the name of the
currently active plan. To load a different plan, use the up and down
arrows to highlight the desired plan and then press the . Press
the soft key to delete the highlighted plan.
Note
The currently active plan cannot be deleted. To delete this plan,
you must first load a different plan.
Tip
You can rename the plan highlighted in the directory by pressing
the SHIFT + keys. A screen will appear asking you to enter a
new name.
VIDEO SIGNAL TYPE
Your microStealth is capable of measuring signal levels on NTSC or
PAL video signals. You should make sure that the correct video
type is selected.
23