Measurement Logging; Auto Tests - Wavetek MS1300 Operation Manual

For documentation purposes, you can print any measurement
screen to a serial printer (Wavetek P-Stealth Printer). Following an
installation check, you can print an installation report that can be
filed with the work order. You can also print a report that lists all
configuration settings including the channel plan.
The MS1300 tunes from 45 to 550 MHz with an option to extend
the range to 5 to 890 MHz.

MEASUREMENT LOGGING

With the MS1300, you can store installation checks that you have
performed throughout the day. You can also store scan and tilt
measurements. Each file is time and date stamped and can be
recalled later for viewing on the LCD screen.
When viewing a file, you can adjust the screen settings the same as
when you are viewing a "live" measurement. Using the built-in
serial port, you can print files and even upload them to StealthWare
for further analysis and archiving.

AUTO TESTS

Automated tests are easy with the MS1300 and provide a conve-
nient way of acquiring proof-of-performance compliance data.
Tests can be executed immediately or scheduled over a period of
time. To conserve battery life, MicroStealth shuts itself off
between scheduled intervals. When configuring an Auto Test, you
can record information about the location at which the test is being
performed. Files can be created for commonly tested locations so
you need only enter the information once.
Auto Tests results are time, date, and temperature stamped and
can be viewed on the LCD screen. Limits are applied to the
measurement data with out-of-tolerance conditions concisely
indicated. You can print a test report for each interval or a compre-
hensive 24 hour report that summarizes data collected from up to
four intervals. Auto Test result files can be uploaded to
StealthWare.
8