Channel Plan Configuration - Wavetek MS1000 Operation Manual

Channel Plan Configuration

VIDEO SIGNAL TYPE
Your microStealth is capable of measuring signal levels on NTSC or
PAL video signals. You should make sure that the correct video
type is selected.
CHANNEL SEQUENCE
You can specify whether channels are listed in numeric or fre-
quency order. This setting also affects the sequence in which
channels are tuned in the LEVEL screen when using the left and
right arrows.
Note
The SCAN screen always displays channels in order of frequency
regardless of the CHANNEL SEQUENCE setting.
BUILD CHANNEL PLAN
Your microStealth is capable of learning which channels are on your
cable plant. This allows you to quickly and easily generate a
customized channel plan. Press the
learn your system.
Important
Be sure that your microStealth is connected to the cable system
before initiating this procedure.
Step 1
You are asked to enter a name for the channel plan. Using
the edit box, you can enter any name up to fifteen charac-
ters long. Be sure to terminate your entry with the
Press the
18
soft key to continue with the next step.
key and let microStealth
key.