The Navigator - Wavetek MS1300 Operation Manual

An edit box can be either "active" or "inactive". You can tell by
looking at the border. If the border is solid, the edit box is active
and any keys that you press are directed toward it. If the border is
dim, the edit box is inactive and is not be affected by key presses.
Usually, you can make the edit box become active by pressing the
key. Be sure to press the again when you have finished
making you entry.

THE NAVIGATOR

You can easily travel to any mode using the NAVIGATOR. To
access the NAVIGATOR, press the key.
An icon appears on the screen for each available mode. Use the up,
down, left, and right arrows to highlight the icon that represents the
mode you want to use. Notice that the name of the mode appears
on the lower portion of the screen beneath the status bar. To get a
description of the highlighted mode, press the SHIFT + key. To
travel to the mode you have highlighted, press any one of the soft
keys or the key.
Tip
You can also use the numeric keys, 1 through 9 to highlight the
desired icon in the NAVIGATOR screen. Each key corresponds to
an icon in the 3 by 3 matrix.
15