Wavetek MS1300 Operation Manual page 30

Tip
There is no minimum on the number of channels that a package
can contain. If you want, you can create a package for only one
channel.
COPY REMOTE PLAN
You can easily copy a channel plan from one microStealth unit to
another. This saves you time when configuring multiple units.
First, connect a cable between the two microStealth units. Select
COPY REMOTE PLAN only on the unit that you want to copy the
channel plan to. A list of all available channel plans found on the
remote unit appears. Use the up or down arrow to highlight the
plan that you want to copy. Press the soft key to begin copying
the plan.
Important
Be sure that the baud rate setting of your microStealth matches that
of the device that it is connected to (see BAUD RATE).
30