Canceling An Auto Test; View - Wavetek MS1300 Operation Manual

Important
To conserve battery life, your MicroStealth will automatically shut
itself off between scheduled intervals.
When the auto test is complete, MicroStealth will display a list of
Auto Test files that are available for viewing and printing.
Note
See the section on VIEW mode to find out how to access files from
Auto Tests that you have performed.

CANCELING AN AUTO TEST

While performing an Auto Test, you will not be able to select other
modes without first canceling the test in progress. Doing this will
result in an incomplete test — you will not be able to resume the
previously configured test.
Press the soft key to cancel the Auto Test. MicroStealth will
display a warning message and ask you to confirm your request.

VIEW

To access measurement files that you have stored in your
MicroStealth, choose the icon from the NAVIGATOR. Files
are categorized into Installations, Scans (including Tilt measure-
ments), and Auto Tests.
53