Attaching And Aligning The Furniture Door - Thermador T24IF70NSP/03 Installation Instructions Manual

19. Attaching and aligning
the furniture door
IT] The double threaded bolts are responsible for
adjusting the height of the furniture front.
C3 Hang the furniture door on the double threaded
bolt.
CI Removethe furniture door.
4x15 ]
F (2 mm)
C3 Align the furniture door with the double threaded
bolts (Torx screwdriver).
C3 Mark a vertical line under the outermost fixing holes
in the adjusting rail.
CI Using a square, extend the drill hole marks which
you have just made to the vertical marks.
E3 Mark and drill the holes.
E3 Screw on the fixing plates (10x).
C3 Transfer the middle drill holes along the outer edge
of the appliance door to the furniture front and mark.
28