25. Adjusting
the door opening
angle
Depending
on the installation
situation,
it may be
necessary
to adjust the door opening angle. A door
opening angle of 115 ° has been set at the factory.
To adjust the door opening
angle to 90°:
[3
Open door to 90 ° .
C3 Insert the cover strip into the space between the
appliance
and the wooden
panel (individual
appliances
only).
24. Mounting
of air separator
Screw the air separator to the furniture door in order to
separate the supply and waste air.
[3
Insert the banking
pin through
the borehotes
which
are now vertically aligned and drive in with
a hammer.
26. Changing
the door spring
To adjust the door spring:
C3 Shorten the air separator
to the required length.
C3 Attach the air separator with the 2 clamps.
Align the air separator
with the center line of the
door as illustrated
in the diagram.
[_For
appliances
with ice water dispenser:
The air separator
must be cut out in the area of the
hose.
C3
Rotate the adjusting
screw with a cross head
screwdriver.
I = maximum
spring tension
0 = no spring tension
33