Preparing The Furniture Doors - Thermador T24IF70NSP/03 Installation Instructions Manual

Pull out the brackets by the measured amount Y.
Cl Screwthe brackets tightly.
L
Attach the base panel.
[_if required, the toe kick panel can be screwed to the
base panel. There are screw holes in the base panel
near the Velcro.
16. Preparing the furniture doors
When performing any work on the furniture doors,
always observe the following:
- Atways screw into the best load bearing material
of the furniture door.
- Setect a screw length which is atways shorter than
the thickness of the furniture front.
- To prevent damage, protect surfaces of the
furniture doors during installation.
The total weight of the furniture front must not
exceed the following values:
1 8"
24"
30"
BM 36" (top, 1 door)
BM 36" (top, 2 doors)
BM 36" (bottom)
37 tbs / 17 kg
50 tbs / 23 kg
64 Ibs / 29 kg
55 tbs / 25 kg
26 tbs / 12 kg (per door)
22 tbs / 10 kg
The furniture fronts are attached to the appliance door
by means of fitting parts on the appliance. These fitting
parts allow the furniture door to be adjusted precisely
and attached securely to the appliance.
25