Attaching And Aligning The Furniture Door - Thermador T24IF70NSP/99 Installation Instructions Manual

4x15
21. Attaching and aligning
the furniture door
IT] The double threaded bolts are responsible for
adjusting the height of the furniture front.
Q Hang the furniture door on the double threaded
bolt.
Q Mark this amount X on the rear of the furniture door.
Q Determine and mark the centerline of the furniture
door.
Q Loosen the 2 nuts and remove the adjusting rail.
Q Put on the adjusting rail and align along the marks.
Mark the drill holes.
Q Drill the holes.
Q Screw on the adjusting rail tightly.
IT] Note
- Attach the adjusting rail to the furniture door with at
least 6 screws. One screw should be inserted under
each double threaded bolt.
6x
4 4_
6x -k
24 _
6x
_r
10x
Q
Q
Align the furniture door with the double threaded
bolts (Torx screwdriver).
Transfer the middle drill holes along the outer edge
of the appliance door to the furniture front and mark.
Wine unit
The adjusting rail features a variety of holes for the
many different design options of furniture doors.
Always screw into the best load-bearing material
of the furniture door.
33