Charging Socket - Permobil C500 Owner's Manual

Permobil C500 Owner´s Manual
Charging
Ensure that the wheelchair is switched off with the On/Off key on the control
panel and then connect the charging plug to the wheelchair's charging socket.
The battery voltage indicator on the wheelchair's control panel lights up and
shows the charging status during charging.
After charging has been completed, the wheelchair must be switched off and on
again with the On/Off key on the control panel before it can be driven.
m
CAUTION
CAREFULLY READ THE INSTRUCTIONS SUPPILED WITH THE CHARGER BEFORE
STARTING TO CHARGE THE WHEELCHAIR.
m
CAUTION
Switch off the wheelchair with the On/Off key on the control panel before charging but ensure that
the main fuse is in the ON position.
Ensure that the charging contact has been fully inserted in the wheelchair's charging socket.
The wheelchair cannot be driven when the charger is connected.

Charging socket

73
Operation