Table of Contents
Advertisement
Aiming the Antenna (continued)
6 Secure the bolts but do not overtighten;
you will need to loosen
them later to fine-tune the antenna.
Note
• The antenna will appear to point
below where the satellite is located.
Do not re-adjust the antenna.
Fine-tuning the Antenna Using
the Signal Seeker
The strength of the signal received
from the satellite should be
optimized.
If the signal gets too weak, the picture will freeze.
Rain
and snow can reduce the signal strength,
so optimizing the signal
strength will help to eliminate their affect. Use the Signal Seeker to
fine-tune the aim of the antenna.
The Signal Seeker light blinks slowly
when the antenna is receiving a weak signal and blinks faster as the
signal grows stronger.
Note
* TheSignal Seekerwill only work when
the on-screensignalstrength meter is
displayed on your TV.
LNB _
Signal Seeker
1
To fine-tune the azimuth, loosen the two mounting bolts that
hold the antenna on the mast or pole.
40
Chapter 3: Aiming the Antenna
Advertisement
Table of Contents
