Table of Contents
Advertisement
Pointing
the Antenna
Note
• Theposition oftheantenna
in this
illustration corresponds to the 45 °
elevation from the example on page 10.
Point the antenna
toward the satellite using the azimuth
and elevation
headings
displayed
in the ZIP CODE or SET UP ANTENNA
screen,
described
on page 38.
1
Loosen the four adjustment
bolts on the back of the antenna.
2
Set the elevation pointer
to the correct elevation heading.
ustment
Bolts
(ea. side)
Elevation
Pointer
Note
• Use the compass toJind the antenna
heading.
3
Secure the bolts but do not overtighten;
you will need to loosen
them later to fine-tune the antenna.
4
Loosen the two mounting bolts that hold the antenna onto the
mast or pole.
5
Point the antenna toward the correct azimuth heading.
Bolts
(continued)
Chapter 3: Nming the Antenna
39
Advertisement
Table of Contents
