Table of Contents
Advertisement
Installation instructions:
1
2
Choose a flat and secure location to install the antenna and hold
the base plate in position,
Position the four outer holes of the base plate over the surface of
the bricks. Do not drill into the mortar around the bricks.
Outside Holes
(4) 1/4"- 20 x 3"
Machine Screw_
RelativelyFlat
Sun'ace
3
Use a level to determine whether the mast can be vertically
aligned before you drill any holes.
Level
Nuts
(ea. side)
90o'X_
_
Level the Mast
-1
at Right Angles
Side View
Top View
A) Loosen the pivot bolt and adjustment nuts which connect
the bottom of the mast to the base plate and align the mast in
a vertical position.
B) Place the level along the top part of the mast and take two
readings 90 = apart from each other.
C) Tighten the pivot bolt and adjustment nuts.
(continued)
Chapter 3: Installing the Mast or a Pole
25
Advertisement
Table of Contents
