Table of Contents
Advertisement
Tools and materials needed for this installation:
I brick
2 bags ready-mix
cement
Container to mix cement
Guy wires/wooden
stakes
Hacksaw
Level
Metal pole (6' long rain. x 11/4"- 11/2" galvanized
steel pipe)
Shovel
>Warning
• Do not install the antenna near power lines.
>'Caution
• Avoid underground electric, telephone, gas, water and sewer lines when
digging in your yard. Contact your local utility companies for help locating
underground utility lines.
• Do not install the antenna where it could be bumped or jarred by people,
furniture, doors or pets.
• Do not attempt any installation in rainy or windy conditions.
Note
• Bury the pole 6" below thefrost line if
you live in an areathat experiences
freezing temperatures.
Installation
instructions:
1
Dig a hole at least 8" in diameter and 36" deep.
2
Cut the bottom of the pole at a 45° angle with a hacksaw. This
prevents the pole from rotating after installation.
(continued)
Chapter 3: Installing the Mast or a Pole
17
Advertisement
Table of Contents
