Cinder Block Surface
The satellite antenna
can be installed
on cinder block surfaces.
This
section provides
instructions
on how to mount the mast onto the
following:
Side of your house
o
Wall
i ¸ ' ...
.i
Tools and materials needed for this installation:
You will need the following tools and materials for this installation:
Hammer
Level
*Machine screws (4) '/4" - 20 x 3"
Masom'y drill bit (1/2")
Pencil
Power drill
*Togglers (4)
*Washers
(4) Vi'
Wrench (3/8")
*Included in the Installation Kit.
_.Wamin9
• Do not install the antenna near power lines.
_Caution
• Do not install the antenna where it could be bumped or jarred by people,
furniture, doors or pets.
• Do not attempt any installation in rainy or windy conditions.
(continued)
Chapter 3: Installing the Mast or a Pole
27