Table of Contents
Advertisement
Installing the Antenna
This section contains instruchons
for installing the antenna. There are
two procedures
you need to complete:
Assembling
the Antenna
[_
Mounting
the Antenna
on the Mast or Pole
Tools needed to install the antenna:
Phillips screwdriver
Assembling the Antenna
Assemble
the antenna
by bolting the LNB support
arm onto the
reflector.
Reflector Bracket _
__
"
1
Place the end of the LNB support arm against the back of the
reflector bracket and align the two screw holes.
2
Screw the two machine screws in the LNB support ann into the
reflector brackot and tight_ evenly (torque 36-45 lb-in). Do not
overtighten.
The antenna is assembled and is now ready to be mounted on the
mast or pole you installed earlier.
(continued)
Chapter 3: Installing the Antenna
31
Advertisement
Table of Contents
