Sony SAN-18D1 Installation Manual page 38

Satellite antenna for sat-a 1 and sat-b1 satellite receivers
Table of Contents

Advertisement

Aiming the Antenna (continued)
Note
• You may also get your azimuth and
elevation coordinates by selecting
LA T/LONG, and inputting your
longitude and latitude coordinates.
11
Select ZIPCODE.
SET UP ANTENNA
D_mil_
the azimuth and elevation
and d_
the tiEAlal _.
'L °llIJlltlitltllPlllltlllllll
A
12
Enter your zip code by using the 0 - 9 buttons.
Your azimuth
and elevation will appear at the bottom of the screen. Select
RETURN.
ENTER ZIP CODE
Useyour _
code to he_ locke Ute _mtrth
and elev.-tJcm,
nBDnD
A_'nmll_l 137 _
EleYa*_of146
degrees
Note
• The azimuth and elevation for
Los Angeles are repre.-_mted in this
illust_tian.
13
Your azimuth and elevation
are also displayed
at the bottom of
the SET UP ANTENNA
screen. Above the azimuth and
elevation is the Signal Strength Meter you will use to fine-hzne
the aim of the antenna.
SET UP ANTENNA
,u..FT'Ti
This is the screen you use to point and fine-tune the antenna in
the following sections.
38
Chapter 3: Aiming the Antenna

Advertisement

Table of Contents
loading

This manual is also suitable for:

San-18s1

Table of Contents