Maintaining Your Heater's Appearance; Battery Replacement; Power Backup Batteries; Control Panel Light Battery - Travis Industries 31 DVI Owner's Manual

34

Maintaining Your Heater's Appearance

Fingerprints or other marks left on the optional plated surface may become etched in place if they are not
wiped clean prior to turning the heater on. Clean the plated surfaces with denatured alcohol and a soft
cloth (with the heater cool). Other cleaners may leave a film that may become etched into the surface.

Battery Replacement

Power Backup Batteries

Four AA batteries are used as a power backup for the fireplace in case the household (AC) power goes out. They
also power the comfort control feature. These batteries must be inserted into battery holder (make sure they contact
the terminals - see the illustration below). The fireplace controller will beep once these batteries start to go dead.
Replace batteries before each heating season to insure proper operation.

Control Panel Light Battery

LED lights and a 9v battery are used to illuminate the control panel when the concealment cover is lifted. If the LED
lights do not operate, replace the 9v battery (see the illustration below). The battery holder is held in place with Velcro
and may be removed for easier access.
© Travis Industries
Maintenance
Swing the access door and
control cover down to access
the controls on the insert.
AA Battery Tray
4100322
Battery Holder for
Control Panel Lights
AA
Battery
Holder
100-01235_000