Service Menu; Settings Menu - Mercedes-Benz CLA Operator's Manual

multifunction display in the assistance
graphics display.
For further information about ATTENTION
ASSIST, see ( page 186).
Y
Activating/deactivating Blind Spot
Assist
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the 9 or : button to select
X
Blind Spot Assist.
Press the a button.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
For further information about Blind Spot
Assist, see ( page 188).
Y
When the Blind Spot Assist: Sensors
Deactivated message is shown, the radar
sensors are deactivated.
Switch on the radar sensor system
X
( page 208).
Y
Activating/deactivating Lane Keeping
Assist
Press the = or ; button on the
X
steering wheel to select the
menu.
Press 9 or : to select
X
Keeping Assist.
Press the a button.
X
The current selection is displayed.
Press a to confirm.
X
Press the : or 9 button to set Off,
X
Standard or Adaptive.
Press the a button to save the setting.
X
When Lane Keeping Assist is activated, the
multifunction display shows the lane
markings as bright lines in the assistance
graphic.
For further information about Lane Keeping
Assist, see (
Maintenance menu
DriveAssist
In the
options:
Calling up display messages in message
R
memory (
Checking the tire pressure electronically
R
(
Y
Restarting the tire pressure loss warning
system (Canada only) (
Calling up the service due date
R
(
Y

Settings menu

Introduction
DriveAssist
Lane
In the
options:
Changing the instrument cluster settings
R
Changing the light settings
R
Changing the vehicle settings
R
Changing the convenience settings
R
Restoring the factory settings
R
Menus and submenus
page 190).
Y
Service menu, you have the following
page 212)
Y
page 320)
Y
page 284)
Settings menu, you have the following
205
page 319)
Z