Assist On/Off - Mercedes-Benz CLA Operator's Manual

the W symbol in the multifunction
display are shown in orange.
Press the a button to save the setting.
X
Further information on daytime running
lamps ( page 105).
Y
Switching Adaptive Highbeam Assist on/
off
This function is only available on vehicles with
the Intelligent Light System.
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Adaptive Highbeam
If the Adaptive Highbeam
been switched on, the cone of light and the
_ symbol in the multifunction display
are shown in orange.
Press the a button to save the setting.
X
For further information about Adaptive
Highbeam Assist, see (
Setting the brightness of the ambient
lighting
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Amb. Light +/- function.
You will see the selected setting.
Press a to confirm.
X
Press the : or 9 button to adjust the
X
brightness to any level from
toLevel 5 (bright).
Press the a or % button to save the
X
setting.
Settings
function.
function has
page 108).
Y
Settings
Disabled
Menus and submenus
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
If you have activated the
Lighting function and the light switch is set
to Ã, the following functions are activated
when it is dark:
surround lighting: the exterior lighting
R
remains lit for 40 seconds after unlocking
with the key. If you start the engine, the
surround lighting is switched off and
automatic headlamp mode is activated
( page 105).
Y
exterior lighting delayed switch-off: the
R
exterior lighting remains lit for
60 seconds after the engine is switched off.
If you close all the doors and the trunk lid,
the exterior lighting goes off after
15 seconds.
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Surround Lighting
When the Surround Lighting
activated, the light cone and the area
around the vehicle are displayed in orange
in the multifunction display.
Press the a button to save the setting.
X
Deactivating delayed switch-off of the
exterior lighting temporarily:
Before leaving the vehicle, turn the
X
SmartKey to position 0 in the ignition lock.
Turn the SmartKey to position 2 in the
X
ignition lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
Surround
Settings
function.
function is
Z
207