Memory Functions - Mercedes-Benz CLA Operator's Manual

Memory functions

100
Press memory button M ? and one of the
X
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
the steps.
Calling up a stored parking position
setting
Turn the SmartKey to position 2 in the
X
ignition lock (
Adjust the exterior mirror on the front-
X
passenger side with the corresponding
button ( page 97).
Y
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have
R
disengaged reverse gear
if you press button : for the exterior
R
mirror on the driver's side
Memory functions
Storing settings
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat,
you and other vehicle occupants – particularly
children – could become trapped. There is a
risk of injury.
page 137).
Y
While the memory function is making
adjustments, make sure that no one has any
body parts in the sweep of the seat. If
somebody becomes trapped, immediately
release the memory function position button.
The adjustment process is stopped.
G
WARNING
Children could become trapped if they
activate the memory function, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: position of the exterior
R
mirrors on the driver's and front-passenger
sides
Adjust the seat ( page 93).
X
Y
Adjust the exterior mirror on the driver's
X
side ( page 97).
Y
Briefly press the M memory button and
X
then press storage position button 1, 2 or
3 within three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.