Adjusting The 4-Way Lumbar Support - Mercedes-Benz CLA Operator's Manual

Seats
94
With this function you can adjust the distance
between the head restraint and the back of
the seat occupant's head.
To adjust forwards: pull the head restraint
X
forwards in the direction of the arrow until
it engages.
There are several notches.
To move backwards: press and hold
X
release button : and push the head
restraint backwards.
When the head restraint is in the desired
X
position, release the button and make sure
that the head restraint is engaged in
position.
Adjusting the height of the head
restraints electrically
To adjust the head restraint height: slide
X
the switch for head restraint adjustment
( page 93) up or down in the direction of
Y
the arrow.
Rear seat head restraints
Adjusting the rear seat head restraint
height
To raise: pull the head restraint up to the
X
desired position.
To lower: press release catch : and push
X
the head restraint down until it is in the
desired position.
Removing and installing the rear seat
head restraints
G
WARNING
If head restraints are not installed and
adjusted correctly, they cannot provide
protection as intended. There is an increased
risk of injury in the head and neck area, e.g.
in the event of an accident or when braking.
Always drive with the head restraints
installed. Before driving off, make sure for
every vehicle occupant that the center of the
head restraint supports the back of the head
at about eye level.
The rear head restraints on the outer seats
can be removed and re-installed.
Fold the seat backrest slightly forwards in
X
order to remove the head restraint
( page 258).
Y
To remove: pull the head restraint up to
X
the stop.
Press release catch : and pull the head
X
restraint out of the guides.
To re-install: insert the head restraint so
X
that the notches on the bar are on the left
when viewed in the direction of travel.
Push the head restraint down until you hear
X
it engage in position.

Adjusting the 4-way lumbar support

You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.